A50 SM-S506DL

What is the difference between 1 file firmware and 5 files:
It is known that when you download any firmware for your Galaxy device from sites known to download the firmware such as Sammobile, the firmware contains one file where it updates the Android operating system without deleting anything and the file is used by the Odin Tool in box AP.
But there are firmware of another type are characterized by being more comprehensive and larger containing four files and they are BL-AP-CP-CSC-CSC HOME, They are called several labels: Repair Firmware-Full Firmware-Factory Firmware-Factory Roms,These files are flashed by the Odin tool in the following order BL=BL_S506DL - AP=AP_S506DL - CP=CP_S506DL - CSC/CSC_Home=CSC_S506DL.

What is the difference between CSC or CSC HOME:

CSC: It is the file responsible for the languages ​​of the device but when used it will delete all files on the device (lost data).
CSC HOME: It is the file responsible for the languages ​​of the device, but when used will not delete anything from the device (unformat).

Firmware Link
Contact us to request a free firmware with quick links.
  • S506DLUDU1ASH1 / TFN1ASH1 v9.0
  • S506DLUDU2ASI4 / TFN2ASI4 v9.0
  • S506DLUDS2ASJ1 / TFN2ASJ1 v9.0
  • S506DLUDU3ASL5 / TFN3ASL5 v9.0
  • S506DLUDS4ATA3 / TFN4ATA3 v9.0
  • S506DLUDU5BTC9 / TFN5BTC9 v10
  • S506DLUDS6BTE1 / TFN6BTE1 v10
  • S506DLUDS7BTH2 / TFN7BTH2 v10
  • S506DLUDU8CUA2 / TFN8CUA2 v10
  • S506DLUDU9DUE2 / TFN9DUE2 v11

How To Flash S506DL
  • Download and install Samsung Driver USB.
  • Download the Odin tool 3.13 and then extract it.
  • Download the Firmware and extract it.
  • Download Pit file S506DL depending on the problem of the device you have in case there are no problems in flashing do not use the file.
  • Open odin tool And from the BL box we choose the file BL=BL / AP=AP / CP=CP / CSC=CSC or CSC_HOME, What is the difference between the two files explained at the top.
  • Now boot the device into download mode with Volume Down + Volume Up and connect the Type-C USB cable to device.
  • Connect the device to the computer and press Start.
  • The process will take a few minutes so be patient and never disconnect the cable.
  • After the flash is finished, the device will automatically restart.
  • It will take about 10 minutes to boot the Android device so don't worry.
  • After the boot process is finished, the Setup Wizard will appear.
  • Complete the settings, Congratulations on successfully flashing the device.

You can always contact us in case you encounter any problems and we will be happy to answer you
No comments
Post a Comment