i done all the step but number 19. the last part is says need to reboot the device after i reboot " ONLY OFFICIAL RELEASED BINARIES ARE ALLOWED TO BE ROOT " try to root again the Samsung J4+ (SM-J415GN/DS) i try it (3) times after that it same problem THIS >>> https://www.full-repair-firmware.com/2019/10/how-to-root-j415gn-8.1.0-9.0.html
Hi, I have a Samsung A70 (SM-A705W) (Canada). I've tried to unlock the bootloader using many methods found on the web without luck, and now I read that these phone being a North American version the bootloader cant be unlocked or rooted. Is this true? I found your page to root it but I have a question: The build number shown in my 'About' screen is A705WVLU2ASI5. Your stock binaries are for U1 or S2 but not for U2 (as shown in mine). Can I still use your method and root it? Which binary should I use? I don't want to brick the phone ! The Download page shows the following: Current binary: Samsung Official FRP LOCK: ON WARRANTY VOID: 0X0 QUALCOMM SECUREBOOT: ENABLE KP SWREV: B2(1.1.1.2.1.1) K2 S2 SECURE DOWNLOAD: ENABLE DID: 20321...XXX
Hey I have samsung galaxy Tab A 8 android 9 pie sm-t295 i followed the instruct given, but i couldn't root my phone i keep getting error i have two files SM-T295 U1 and SM-T2925 U2 and i tried both but no luck.
Added!! Odin engine v(ID:3.1301).. File analysis.. Total Binary size: 10 M SetupConnection.. Initialzation.. Get PIT for mapping.. Firmware update start.. NAND Write Start!! SingleDownload. boot.img RQT_CLOSE !! Complete(Write) operation failed. All threads completed. (succeed 0 / failed 1) Removed!! Added!! Removed!! Added!!
olá, amigo estou com um A305GT que está travado na logo, ja tentei atualizar com versão ZTO e ZTA mais sem sucesso, não consigo fazer root pq está travado na logo e como não consigo ativar a Depuração USB, acredito que não seria possivel fazer root, gostaria de saber se o arquivo DRK U3 poderia resolver meu problema?
You should use your device's firmware https://www.full-repair-firmware.com/2019/08/repair-firmware-j260a.html Pay attention to binary your device when choosing a firmware
I have a galaxy tab e that turns on but it shows the Samsung logo which then disappears leaving a black screen. That's where it hangs and does not boot any further. It will not boot into either recovery nor download (odin) mode. Normally I would call it a goner however when the device is powered off and then connected via usb to my computer, it is actually recognized, installs the driver, and lists it as Samsung_Android. It also shows "MTP Usb device" under Portable Devices, lists as "Samsung Mobile USB Modem" under Modems, and as Samsung Mobile USB Composite Device under Universal Serial Bus Controllers. Any Ideas?
I have this firmware ... INS-A207FXXS2ATA1-20200221100306 and applied the S2 option for A207F and it failed. Got to exactly the error on this page ... https://forum.xda-developers.com/galaxy-a20/help/samsung-a207f-root-error-t4048533 ... please advice.
HEY I HAVE A PHONE THAT IS OUT OF SERVICE IT'S THE SAMSUNG GALAXY J-3 ORBIT MODEL NUMBER SM-S367VL CAN YOU GUYS QUICKLY UPLOAD A 4 FILE FIRMWARE REPAIR FOR THIS BUILD NUMBER
S367VLUDS6BTA1
PLEASE UPLOADED WITHIN 24 HOURS OR AS QUICKLY AS POSSIBLE SO I CAN GET MY PHONE BACK IN SERVICE IT IS VERY IMPORTANT AND AS ALWAYS THANK YOU
Buenas Tardes, eh hecho todos los pasos relacionados al root del j4 sm-j400m; pero al momento cuando el magisk manager crea el archivo : magisck patched.tar, en el odin me sale "FAIL", eh averiguado y talvez es porque el RMM del dispositivo esta activado. Podrian ayudarme no se como avanzar mas de eso, llevo todo un dia viendo videos pero no me funciona lo que ellos muestran. Gracias Saludos
HEY THANKS FOR POSTING THE FIRMWARE FOR THE SAMSUNG GALAXY J-3 ORBIT UPDATE MODEL SM-S367VL I REALLY APPRECIATE IT I WAS ABLE TO FLASH MY PHONE AND FIX IT IN 5 MINUTES IT'S SO WONDERFUL TO HAVE IT BACK IN SERVICE
JUST A QUICK QUESTION IS THERE ANY WAY TO UNLOCK THE BOOTLOADER ON THIS SPECIFIC DEVICE AND ROOT IT JUST CURIOUS
I HAVE AN UNLOCK MY BOOTLOADER APPLICATION ON MY COMPUTER I JUST NEED TO KNOW HOW TO ENTER FASTBOOT MODE
AND ENABLE THE OEM UNLOCK OPTION IN DEVELOPER OPTIONS IT IS NOT THERE
AGAIN I HAVE THE SAMSUNG GALAXY J-3 ORBIT MODEL SM-S367VL
I do not know if this firmware is for me or not. I am having great difficulty in seeing Facebook marketplace page. This page is not a full page and it is cut off on both side and it has a very limited viewing area, This is the only page with the problem, so would this firmware fix be what I need or shall I try something different ?
Hello guys. I'm from DR Congo. I've downloaded this firmware from your site: Full Firmware S367VLUDU2ARI3_S367VLTFN2ARI3_8.0.0 BY Windows4Droid. But the file is crypted with a winrar code. Please help me. I'm deadlocked....
Halo saya mencoba melakukan sesi perintah di atas saya melakukan flash patch_boot.img.tar yg sudah di tambal dengan magisk manager setelah saya flash dan eipe factory reset saya kehilangan magisk manager lalu saya install lagi di sana tidak ada magiskbyg terinstall apakah ini gagal di Samsung A50S A507FN binary 4 android 10
Hello I have Samsung A20s model SM-A207F Nd andriod version 9 Baseband version- A207FXXS2ATA1 I'll searched all over but there is no root file of my version so sir please help me its urgent
День добрый.Ищу такую пошивку, ребенок заблокировал тел-н, и с этой прошивкой мне проще его разблокировать. Посмотрел в инете, что и сам смогу, поможите? j530fm u8 combination j530fmxxu8csk3
PDA/AP Version G950FXXS8DTC6 CSC Version G950FOXM8DTC1 MODEM/CP Version G950FXXS8DTC1 Region ECT — Nigeria Build Date 2020-03-18 Changelist 17263988 OS Pie OS Version 9
flashed smoothly but after reboot, when installing the data, it stops at 32% then shows "erasing" then stuck at boot logo for a very long time more than ten minutes. i wiped data/factory reset or clear cache , still it didn't work. i get this error on my recovery menu
"fail to open recovery_cause(No such file or directory)# Reboot recovery cause is [UNKNOWN] Support SINGLE-SKU File-Based OTA Supported API: 3 E: unknown volume for path [/odm] E: unknown volume for path [/vendor] verity verification failed... E: [libfs_mgr]is_dt_compatible(): firmware info was not valid : '/proc/device-tree /firmware/android/compatible : no such file or directory"
I am trying to root a samsung A20 (SM-A205YN) and have 2 questions 1. When I download the boot image it says Pay attention to the level of Binary Example:(U2, U3, U4) These protection details can be found in recovery mode or download mode. and has 3 versions (A205YNDVU2ASF4, A205YNDVU3ASJ4, A205YNDVU4ATA2) how do I determine which version to use ? 2. After installing and opening Magisk Manager app I do not get Open the application settings and from the option Patched Boot Output Formate We choose .img.tar. BUT I do not get this option under settings. What have I done wrong ? I have downloaded and installed the app (through adb install) and pu tthe boot.img on /sdcard
I need to find the stock firmware for samsung galaxy j2 pure J260AZ binary level 5. I used your link for the combination file and now I have nothing to flash it back after the factory binary.
Hello Full Repair Firmware, I commend you for your great work. I need SAMSUNG GEAR S2 COMBINATION firmware link. Please send the link to my mail [email protected] Thank you.
Hello brother, send me the latest link EFS SM-G930F.. Link EFS SM-G930F = https://mega.nz/file/aaJz3AhK#9bB5SYyuTBgkJqyfIYzjjhy12RSbaac1UWlr8Q2leM4 , File corrupted Please repair..
Hi, looking at your site I saw you have full files for Galaxy Tab S4. Now I have a SM-T837V I bought on eBay and is working great with that last update. But I saw that Standard model (SM-T835)a upgraded to Android 10 and their firmwares are updated more frequently. Apart from this, it has all the standard features from Samsung. Is there a way convert the tablet to a standard one from Samsung instead of Verizon Branded and Maintain full LTE connectivity and all features using your the firmware listed here and the PIT file for partition?
after trying this(((Fix DM-Verity (DRK) Galaxy J7 Prime SM-G610F FRP:ON OEM:ON))) odin show pass.. all problem solved... but my touch screen dosent work bro... please help me
Hello! First of all thank you for your website. I've been trying to extract the files I downloaded using: windows4droid and windows4droid95 and they don't work! Please help me! Thank you.
Hi Brother, My Device is Galaxy SM-M015G(BB Version M015GXXU1ATD2) When extracting the file " boot_M015GXXU1ATD2" Downloaded from the link " "Root M015G Android v10" I am getting "boot.img.lz4" You mentioned "5-The entire file name will become boot.img" ??? Another issue is " 6-Open the application settings and from the option Patched Boot Output Formate We choose .img.tar." I am not getting such option on Magisk Manager Settings !!!!
#4 done without extracting.Followed the steps from #5 to #15.But Odin shows "FAIL" and on the device it is showing as Follows: (a) CURRENT BINARY : Samsung Official (b)OEM LOCK : ON(U) (c)KG STATUS : CHECKING (d)QUALCOMM SECUREBOOT : ENABLE (CSB) (e)RP SWREV : S1, T1, R1,A1, P1 (f)RP SWREV : K 1, S 1 (g)SECURE DOWNLOAD :ENABLE (h)DID : 0000b312d8ce (i)udc_start (j)download mode !! (k)Custom Binary(boot) Blocked By OEM LOCK(in Red Colour) Where is the issue now???
Thank You So much Bro! Successfully Rooted SM-M015G! I am so greatful to YOU,bcos I had gone through so much of articles in google,but none of them helped me to root!!!!
I got this problem "Secure check fail:boot.img" and a security error. I tried to follow your instructions in rooting samsung a20s, but the results end in this. Please help, im stuck with this situation and i want my phone to back normal. Thank you!
Have J320A 2016 with a "Binary Blocked by FRP Lock" msg repeating on start. I need steps to get back in phone and recover contacts without factory reset. I'm in ODIN on Pit page with J3XLTE_USA_ATT.pit file. If I hit will I lose my contacts?
Looking for July patched firmware for Note 20 Ultra Korean region.. Model number is N986N and CSC is KTC Build is N986NKSU1ATGI with July security patch
I followed the procedure, done it few times before on various devices. However in this case n5110 - note 8.0, I get the message from odin "fail". The device says "write fail", description of the message in odin says - "Re-Partition operation failed". I have not used "pit" file.
I followed your instructions from "https://www.full-repair-firmware.com/2019/10/how-to-root-a405fn-9.0.html" and "EFTSU Manager" signals access to the root, but after the reboot everything comes back, i.e. no root. Help me, I don't know what I'm doing wrong. I use Android 10 UI 2.0 - A405FNXXS3BTI3 phone: Galaxy A40 (SM-A405FN) EFTSU file: SM-A405FN_A405FNXXS3BTI3_10_20902.9EFT
i have a samsung S8 g950fd with android 9 update bunary version is 12 when will be a full repair firmaware that matches the new binary version ? because the latetst one in the web site is version 9
i`m having trouble about the root of the galaxy s9 g9600, in the site there are diferents versions and it says to download the same as my phone, but my phone is G9600ZCU7FTK2 and there isnt the same to download, can i download a different one? https://www.full-repair-firmware.com/p/root-g9600.html
can you help me with converting the SM-N8858 to global rom? instead of the China Rom
ReplyDeleteCurrently there is no solution
DeleteHello, i tried your way but my phone keep restarting itself, android is not loading, kindly help me please
ReplyDeleteWhat is the model of the device
DeleteYou did a root
i done all the step but number 19. the last part is says need to reboot the device after i reboot " ONLY OFFICIAL RELEASED BINARIES ARE ALLOWED TO BE ROOT "
ReplyDeletetry to root again the Samsung J4+ (SM-J415GN/DS) i try it (3) times after that it same problem
THIS >>>
https://www.full-repair-firmware.com/2019/10/how-to-root-j415gn-8.1.0-9.0.html
Send me on Facebook to solve the problem
DeleteSamsung Latest Flash File Uplode Pleass
ReplyDeleteAll 100% Working Files Good Job Brother
Vgood Wapsite Orignal Official Firmwares
Welcome bro
DeleteHello i need a root for Tablet Samsung SM-T295 it's possible ?
ReplyDeleteHi,
ReplyDeleteI have a Samsung A70 (SM-A705W) (Canada). I've tried to unlock the bootloader using many methods found on the web without luck, and now I read that these phone being a North American version the bootloader cant be unlocked or rooted. Is this true?
I found your page to root it but I have a question: The build number shown in my 'About' screen is A705WVLU2ASI5. Your stock binaries are for U1 or S2 but not for U2 (as shown in mine). Can I still use your method and root it? Which binary should I use? I don't want to brick the phone !
The Download page shows the following:
Current binary: Samsung Official
FRP LOCK: ON
WARRANTY VOID: 0X0
QUALCOMM SECUREBOOT: ENABLE
KP SWREV: B2(1.1.1.2.1.1) K2 S2
SECURE DOWNLOAD: ENABLE DID: 20321...XXX
Your help would be appreciated.
Thanks
Unfortunately, my friend
DeleteCannot open bootloader
Is there any way to change the ROM to one that can root?
DeleteNot possible
DeleteUnfortunately
ممكن الباسورد لفك الضغط لفلاشه A705FN البرامج الثابتة الكاملة لجهاز Samsung Galaxy A70 SM-A705FN
ReplyDeleteA705FNXXU3ASG6 / OXM3ASG6 v9.0
وهل هى جيده فى اصلاح اصدار النطاق إصلاح إخفاء Imei.
إصلاح النطاق الأساسي غير معروف.
إصلاح IMEI غير صالح و Baseband.
إصلاح واي فاي وبلوتوث.
هدا اكيد ؟
pass:windows4droid
DeleteI want to download j700f full flash file 6.0.1 modewith volte supporting
ReplyDeletePls help me
I cant download from given links
https://www.full-repair-firmware.com/2017/10/full-firmware-j700f.html
DeleteUse the latest version J700FXXU4BRL2 / ODD4BRK3 v6.0.1
Help me My cellphone Samsung J7 Pro J730g can't be flashed again always fails custom binary blocked frp
ReplyDeleteYou can contact us to solve the problem
Deletehttps://www.full-repair-firmware.com/p/contact-us.html
how to solve that problem please help me
DeleteTalk to us on Facebook
Deletewindows4droid password does not work
ReplyDeleteWhat file have you downloaded?
DeleteI have done all process with my galaxy j4 plus sm-415f xxu5bsk6. But I don't have root access
ReplyDeletePlease contact us on Facebook for easy communication
DeleteHey I have samsung galaxy Tab A 8 android 9 pie sm-t295 i followed the instruct given, but i couldn't root my phone i keep getting error i have two files SM-T295 U1 and SM-T2925 U2 and i tried both but no luck.
ReplyDeleteAdded!!
Odin engine v(ID:3.1301)..
File analysis..
Total Binary size: 10 M
SetupConnection..
Initialzation..
Get PIT for mapping..
Firmware update start..
NAND Write Start!!
SingleDownload.
boot.img
RQT_CLOSE !!
Complete(Write) operation failed.
All threads completed. (succeed 0 / failed 1)
Removed!!
Added!!
Removed!!
Added!!
This is the error,
Please send us on Facebook to solve the problem
Deletehelloo i ned a help i try to flash my s6 edge g925w8 but i fail on pit file i put the pit file it fail on bootloader tell me a solution
ReplyDeleteContact us on Facebook to solve the problem
Deletei need your help to root my samsung A20s
ReplyDeleteYou can send us on Facebook to help
DeleteSir help me samsung a107f update for touch screen not working
ReplyDeleteAfter the update the problem occurred
Deleteolá, amigo estou com um A305GT que está travado na logo, ja tentei atualizar com versão ZTO e ZTA mais sem sucesso, não consigo fazer root pq está travado na logo e como não consigo ativar a Depuração USB, acredito que não seria possivel fazer root, gostaria de saber se o arquivo DRK U3 poderia resolver meu problema?
ReplyDeleteEnvie-nos um email para resolver seu problema
Deleteestá congelado no logo
ReplyDeleteEnvie-nos um email para resolver seu problema
Deleteel password de este archivo COMBINATION_FAC_FA80_S367VLUDU2ARJ3_BY Windows4Droid
ReplyDeletewindows4droid95
Deleterassword pleaS
ReplyDeleteFull Firmware A510FXXS8CSF4_A510FSFR8CSC2_7.0 BY Windows4Droid .zip
pass:windows4droid
Deletesw rev check fail : [ab1]Fused 4 > Binary 1
ReplyDeleteplease clarify
DeleteMy firmware is not listed..you have firmware for SM-J260A but it's not exactly the same can I use different firmware for same model or not
ReplyDeleteYou should use your device's firmware https://www.full-repair-firmware.com/2019/08/repair-firmware-j260a.html Pay attention to binary your device when choosing a firmware
DeleteWhere can u find a combination firmware for J260a Binary 5 that supports pie not Oreo... please help..
Deletehttps://www.full-repair-firmware.com/2019/08/Combination-j260a.html , Combination J260A Binary 5:
DeleteI have a galaxy tab e that turns on but it shows the Samsung logo which then disappears leaving a black screen. That's where it hangs and does not boot any further. It will not boot into either recovery nor download (odin) mode. Normally I would call it a goner however when the device is powered off and then connected via usb to my computer, it is actually recognized, installs the driver, and lists it as Samsung_Android. It also shows "MTP Usb device" under Portable Devices, lists as "Samsung Mobile USB Modem" under Modems, and as Samsung Mobile USB Composite Device under Universal Serial Bus Controllers. Any Ideas?
ReplyDeleteThe model is SM-T377A
DeleteSend us on facebook https://www.full-repair-firmware.com/p/contact-us.html, maybe we can help you
Deletehave a samung SM-G610Y j7 prime i cant dload ur firmware
ReplyDeletehttps://www.full-repair-firmware.com/2017/10/full-firmware-g610y.html
Deletei install A107FXXS5ASL3 with odin.its show me pass but my device is not rebot & its not rooted..now what i do?
ReplyDeleteYou can send us on Facebook to help you
DeleteI have this firmware ... INS-A207FXXS2ATA1-20200221100306 and applied the S2 option for A207F and it failed. Got to exactly the error on this page ... https://forum.xda-developers.com/galaxy-a20/help/samsung-a207f-root-error-t4048533 ... please advice.
ReplyDeleteYou can contact us on Facebook for easy speaking
DeleteDesrootee mi teléfono y no puedo tener ni samsung pass, carpeta segura y entre otras, hay alguna manera de arreglarlo?
ReplyDeleteno se puede
DeleteThis comment has been removed by the author.
ReplyDeleteIt will be published soon
DeleteThis comment has been removed by the author.
ReplyDeleteIt will be published soon
DeleteThis comment has been removed by the author.
DeleteThis comment has been removed by the author.
DeleteWe will upload it soon
DeleteThe Samsung a20 sm-a20w combination firmware for binary 3 and 4 are actually for the a205u could you please add the a205w combination firmware
ReplyDeleteIt works on the following models A205W-A205U-A205U1, But kg protection must be disabled
Deletes5 sm-g900md n instala rom erro pit,ja tentei instalar arquivo pit mas n vai
ReplyDeleteVocê pode nos enviar um email no Facebook https://www.full-repair-firmware.com/p/contact-us.html
DeleteHi there. I've just downloaded the Samsung S7 Oreo firmware (Full Firmware G930UUEU9CSA3_G930UOYM9CSA3_8.0.0 BY Windows4Droid.rar).
ReplyDeleteMy extraction software says that a password is requiured, but none is given. could you please either provide or direct me to it?
kind regards
M.
Pass:windows4droid
DeleteHEY I HAVE A PHONE THAT IS OUT OF SERVICE IT'S THE SAMSUNG GALAXY J-3 ORBIT MODEL NUMBER SM-S367VL CAN YOU GUYS QUICKLY UPLOAD A 4 FILE FIRMWARE REPAIR FOR THIS BUILD NUMBER
ReplyDeleteS367VLUDS6BTA1
PLEASE UPLOADED WITHIN 24 HOURS OR AS QUICKLY AS POSSIBLE SO I CAN GET MY PHONE BACK IN SERVICE IT IS VERY IMPORTANT AND AS ALWAYS THANK YOU
It will be published soon
DeleteThis comment has been removed by the author.
ReplyDeleteHEY IT'S ME AGAIN I URGENTLY NEED A 4 FILE REPAIR FIRMWARE UPLOADED FOR THE SAMSUNG GALAXY J-3 ORBIT MODEL# sm-s367vl
ReplyDeletefor this build number
S367VLUDS6BTA1
PLEASE UPLOAD IT IMMEDIATELY THANK YOU I NEED TO GET MY PHONE BACK IN SERVICE
When available, I will publish it
DeleteBuenas Tardes, eh hecho todos los pasos relacionados al root del j4 sm-j400m; pero al momento cuando el magisk manager crea el archivo : magisck patched.tar, en el odin me sale "FAIL", eh averiguado y talvez es porque el RMM del dispositivo esta activado.
ReplyDeletePodrian ayudarme no se como avanzar mas de eso, llevo todo un dia viendo videos pero no me funciona lo que ellos muestran.
Gracias Saludos
Quizás podamos ayudarte https://www.facebook.com/windows4droid
Deletewhat is the password of zip file SM-J200BT
ReplyDeletewindows4droid
Deletehi i have 2 questions for my sm-g950f
ReplyDeleteis there a way t change the binaries from 8 to another or is it possible to use one of the other repair fw´s and which one is it
SM-G950FZKADBT
current rom
G950FXXS8DCT6
1-Binary cannot be reduced, 2-Use the latest release to avoid problems
ReplyDeletemy s6 e+ stuck on boot logo (the first one) after flashing custom logo
ReplyDeleteContact us on Facebook, maybe we can help you
DeleteHEY THANKS FOR POSTING THE FIRMWARE FOR THE SAMSUNG GALAXY J-3 ORBIT UPDATE MODEL SM-S367VL I REALLY APPRECIATE IT I WAS ABLE TO FLASH MY PHONE AND FIX IT IN 5 MINUTES IT'S SO WONDERFUL TO HAVE IT BACK IN SERVICE
ReplyDeleteJUST A QUICK QUESTION IS THERE ANY WAY TO UNLOCK THE BOOTLOADER ON THIS SPECIFIC DEVICE AND ROOT IT JUST CURIOUS
I HAVE AN UNLOCK MY BOOTLOADER APPLICATION ON MY COMPUTER I JUST NEED TO KNOW HOW TO ENTER FASTBOOT MODE
AND ENABLE THE OEM UNLOCK OPTION IN DEVELOPER OPTIONS IT IS NOT THERE
AGAIN I HAVE THE SAMSUNG GALAXY J-3 ORBIT MODEL SM-S367VL
THANKS
Boot loader cannot be unlock therefore, the device cannot be rooted
DeleteI do not know if this firmware is for me or not. I am having great difficulty in seeing Facebook marketplace page. This page is not a full page and it is cut off on both side and it has a very limited viewing area,
ReplyDeleteThis is the only page with the problem, so would this firmware fix be what I need or shall I try something different ?
What is the device, did you update your Facebook application
DeleteHello guys. I'm from DR Congo. I've downloaded this firmware from your site: Full Firmware S367VLUDU2ARI3_S367VLTFN2ARI3_8.0.0 BY Windows4Droid. But the file is crypted with a winrar code. Please help me. I'm deadlocked....
ReplyDeletePass:windows4droid
DeleteHalo saya mencoba melakukan sesi perintah di atas saya melakukan flash patch_boot.img.tar yg sudah di tambal dengan magisk manager setelah saya flash dan eipe factory reset saya kehilangan magisk manager lalu saya install lagi di sana tidak ada magiskbyg terinstall apakah ini gagal di Samsung A50S A507FN binary 4 android 10
ReplyDeleteTerhubung dengan kami di Facebook
DeleteHello
ReplyDeleteI have Samsung A20s model
SM-A207F
Nd andriod version 9
Baseband version- A207FXXS2ATA1
I'll searched all over but there is no root file of my version so sir please help me its urgent
Contact us on Facebook, maybe we can help you
DeleteI am odin 3.13.1 flash A505GN 5TB1 and FIXDRK is RQT_close
ReplyDeleteAdded!!
Odin engine v(ID:3.1301)..
File analysis..
Total Binary size: 64 M
SetupConnection..
Initialzation..
Get PIT for mapping..
Firmware update start..
NAND Write Start!!
SingleDownload.
boot.img
RQT_CLOSE !!
Complete(Write) operation failed.
All threads completed. (succeed 0 / failed 1)
plz Help
Contact us on Facebook to solve the problem
DeleteДень добрый.Ищу такую пошивку, ребенок заблокировал тел-н, и с этой прошивкой мне проще его разблокировать. Посмотрел в инете, что и сам смогу, поможите? j530fm u8 combination j530fmxxu8csk3
ReplyDeleteВ данный момент недоступно
DeleteHallo I have downloaded g611ffddu1arg3 and when extracting it is requesting for a password.... please assist
ReplyDeletepass:windows4droid
DeleteHallo,I have downloaded flash file g611ffddu1arg2 and when extracting it is requesting password... please assist me
ReplyDeletePassword:windows4droid
DeleteBisakah samsung galaxy a20s versi android 9 yang telah diperbarui ke versi 10, dikembalikan ke versi asal versi 9 ?
ReplyDeleteTerhubung dengan kami di Facebook, https://www.full-repair-firmware.com/p/contact-us.html
Deletepor favor los Combination file J7 Pro SM-J730G u8
ReplyDeleteCurrently, not available
Deleteflashed firmware to s8 sm-g950f
ReplyDeletePDA/AP Version G950FXXS8DTC6
CSC Version G950FOXM8DTC1
MODEM/CP Version G950FXXS8DTC1
Region ECT — Nigeria
Build Date 2020-03-18
Changelist 17263988
OS Pie
OS Version 9
flashed smoothly but after reboot, when installing the data, it stops at 32% then shows "erasing" then stuck at boot logo for a very long time more than ten minutes. i wiped data/factory reset or clear cache , still it didn't work.
i get this error on my recovery menu
"fail to open recovery_cause(No such file or directory)#
Reboot recovery cause is [UNKNOWN]
Support SINGLE-SKU
File-Based OTA
Supported API: 3
E: unknown volume for path [/odm]
E: unknown volume for path [/vendor]
verity verification failed...
E: [libfs_mgr]is_dt_compatible(): firmware info was not valid : '/proc/device-tree
/firmware/android/compatible : no such file or directory"
pls help
Connect with us on Facebook, https://www.full-repair-firmware.com/p/contact-us.html
Deletei need password
ReplyDeletepass:windows4droid
Deleteunsupported image file error magisk
ReplyDeleteUse the file you want to use in a format .tar without extracting the file
Deletephone flishing after baseband unknown & IMEI Null . plz any sajeshon
ReplyDeleteConnect with us on Facebook
DeleteI am trying to root a samsung A20 (SM-A205YN) and have 2 questions
ReplyDelete1. When I download the boot image it says
Pay attention to the level of Binary Example:(U2, U3, U4) These protection details can be
found in recovery mode or download mode.
and has 3 versions (A205YNDVU2ASF4, A205YNDVU3ASJ4, A205YNDVU4ATA2) how
do I determine which version to use ?
2. After installing and opening Magisk Manager app I do not get
Open the application settings and from the option Patched Boot Output Formate
We choose .img.tar.
BUT I do not get this option under settings. What have I done wrong ?
I have downloaded and installed the app (through adb install) and pu tthe boot.img on
/sdcard
Any advice greatly appreciated
Thanks
Contact me on Facebook to solve your problem
DeleteI need to find the stock firmware for samsung galaxy j2 pure J260AZ binary level 5. I used your link for the combination file and now I have nothing to flash it back after the factory binary.
ReplyDeleteIt will be added soon
Deletehow to download and install my pc in Repair Firmware Device Sony Xperia XA1 Dual G3116 software ..i need link
ReplyDeletehttps://www.full-repair-firmware.com/2018/10/firmware-g3116.html
Deletecan i use this to downgrade from Pie to Oreo?
ReplyDeleteyou can if you keep the same binary level.
DeleteYes, as he said you can if you keep the same binary level.
DeleteHello Full Repair Firmware, I commend you for your great work. I need SAMSUNG GEAR S2 COMBINATION firmware link. Please send the link to my mail [email protected]
ReplyDeleteThank you.
What is the model
Deletehelp me please...Fix custom binary blocked by frp lock.what should I do..
ReplyDeleteFlash new firmware
DeleteHi,
ReplyDeleteDo you have odin firmware for Samsung j4 plus
SM-J415GN/DS
to fix the touch issue?
Contact us on Facebook, https://www.full-repair-firmware.com/p/contact-us.html
DeleteThis comment has been removed by the author.
ReplyDeleteHello brother, send me the latest link EFS SM-G930F.. Link EFS SM-G930F = https://mega.nz/file/aaJz3AhK#9bB5SYyuTBgkJqyfIYzjjhy12RSbaac1UWlr8Q2leM4 , File corrupted Please repair..
ReplyDeleteBinary
DeleteHello my phone is J730fxxu6 he is not working always restart I do what you said but not fix if you can help me please and thanks
ReplyDeleteConnect with us on Facebook
DeleteI downloaded Samsung SM-G935S from your site but its on password. Can you please help me out with the password [email protected]
ReplyDeletePass:windows4droid
Deletehello i nrrd help cant find samsung a10e sm a102u full combo file
ReplyDeletehttps://www.full-repair-firmware.com/2019/08/Combination-a102u.html
Deleteit keeps redirecting me cant figure out why
DeleteContact us on Facebook to solve the problem
DeleteI rooted my SM-T515 with magsik.... By using this shall convert any user app to system app
ReplyDeleteThis can be done by applications
DeleteI tried rooting the a20s but it did not work
ReplyDeleteI followed all your steps
The new protections are not currently rootable
DeleteHi Dear Full Repair I tried rooting my SM-T290 8.0, 2019 using your instructions. As a result Odin gave me this error
ReplyDeleteAdded!!
Odin engine v(ID:3.1401)..
File analysis..
Total Binary size: 10 M
SetupConnection..
Initialzation..
Get PIT for mapping..
Firmware update start..
NAND Write Start!!
SingleDownload.
boot.img
RQT_CLOSE !!
Complete(Write) operation failed.
Please help. Thank you in Advance.
Contact us on Facebook to solve the problem
DeleteGot it. Sent request to join group.
DeleteThank you
Welcome
DeleteHi, looking at your site I saw you have full files for Galaxy Tab S4. Now I have a SM-T837V I bought on eBay and is working great with that last update. But I saw that Standard model (SM-T835)a upgraded to Android 10 and their firmwares are updated more frequently. Apart from this, it has all the standard features from Samsung. Is there a way convert the tablet to a standard one from Samsung instead of Verizon Branded and Maintain full LTE connectivity and all features using your the firmware listed here and the PIT file for partition?
ReplyDeleteBasically both tables are the same.
What do you think?
Thanks.
Not possible
DeleteOk, Thanks anyway. Hope you have a great day.
ReplyDeleteWelcome
Deleteafter trying this(((Fix DM-Verity (DRK) Galaxy J7 Prime SM-G610F FRP:ON OEM:ON))) odin show pass.. all problem solved... but my touch screen dosent work bro... please help me
ReplyDeleteContact us on Facebook to solve the problem
DeleteHello! First of all thank you for your website. I've been trying to extract the files I downloaded using: windows4droid and windows4droid95 and they don't work!
ReplyDeletePlease help me! Thank you.
What file did you download?
Delete6-Open the application settings and from the option Patched Boot Output
ReplyDeleteI didn't found it in magisk sitting
Contact us on Facebook to solve your problem
DeleteHI
ReplyDeletewhat is the password for extracting the file
windows4droid
DeleteHi Brother,
ReplyDeleteMy Device is Galaxy SM-M015G(BB Version M015GXXU1ATD2)
When extracting the file " boot_M015GXXU1ATD2" Downloaded from the link " "Root M015G Android v10" I am getting "boot.img.lz4" You mentioned "5-The entire file name will become boot.img" ???
Another issue is " 6-Open the application settings and from the option Patched Boot Output Formate We choose .img.tar." I am not getting such option on Magisk Manager Settings !!!!
What is the Solution? Plse Help Me!
Do not extract the file and skip step # 6, If you want help, contact us on Facebook, https://www.full-repair-firmware.com/p/contact-us.html
Delete#4 done without extracting.Followed the steps from #5 to #15.But Odin shows "FAIL" and on the device it is showing as Follows:
Delete(a) CURRENT BINARY : Samsung Official (b)OEM LOCK : ON(U) (c)KG STATUS : CHECKING
(d)QUALCOMM SECUREBOOT : ENABLE (CSB) (e)RP SWREV : S1, T1, R1,A1, P1 (f)RP SWREV : K 1, S 1 (g)SECURE DOWNLOAD :ENABLE (h)DID : 0000b312d8ce (i)udc_start
(j)download mode !! (k)Custom Binary(boot) Blocked By OEM LOCK(in Red Colour)
Where is the issue now???
(a),(b),(c),(d).......(k) added my self for your convenience, since it is showing altogther without space when I am posting here!
DeleteConnect with us on Facebook, www.facebook.com/windows4droid
Delete(J415FXXU6BTB4) Root dosyasını J415FXXU6BTG1 cihazıma yapabilir miyim? J415F
ReplyDeleteConnect with us on Facebook
DeleteThis comment has been removed by the author.
ReplyDeleteThis firmware: https://www.full-repair-firmware.com/2020/08/repair-firmware-n985f.html?m=1 Can fix demo n986f ?
ReplyDeleteNo
DeleteThank You So much Bro! Successfully Rooted SM-M015G!
ReplyDeleteI am so greatful to YOU,bcos I had gone through so much of articles in google,but none of them helped me to root!!!!
Welcome bro
DeleteWhich binary file for galaxy tab a 8.0 sm-t290... my build is T290XXU3BTG1
ReplyDeleteConnect with us on Facebook
DeleteI got this problem "Secure check fail:boot.img" and a security error. I tried to follow your instructions in rooting samsung a20s, but the results end in this. Please help, im stuck with this situation and i want my phone to back normal. Thank you!
ReplyDeleteConnect with us on Facebook
Deletei did as instructed sm-A515f it did get rooted any help
ReplyDeleteConnect with us on Facebook
Deleteneed some help to get root my SM-A515f
ReplyDeleteHave J320A 2016 with a "Binary Blocked by FRP Lock" msg repeating on start. I need steps to get back in phone and recover contacts without factory reset. I'm in ODIN on Pit page with J3XLTE_USA_ATT.pit file. If I hit will I lose my contacts?
ReplyDeleteFlash the device with the AP file only, But nothing is guaranteed https://www.full-repair-firmware.com/2017/10/full-firmware-j320a.html
DeleteLooking for July patched firmware for Note 20 Ultra Korean region..
ReplyDeleteModel number is N986N and CSC is KTC
Build is N986NKSU1ATGI with July security patch
Please make a video on how to root Samsung A115F along with the files needed. because i have followed the steps but my phone is bootlop
ReplyDeleteThe article has been updated, follow the new explanation, https://www.full-repair-firmware.com/2020/05/how-to-root-a115f.html
Deletewould be highly appreciate if u can provide pit file samsung galaxy s3 gt i9300t.
ReplyDeletehttps://www.full-repair-firmware.com/p/galaxy-s3.html
DeleteI followed the procedure, done it few times before on various devices. However in this case n5110 - note 8.0, I get the message from odin "fail". The device says "write fail", description of the message in odin says - "Re-Partition operation failed". I have not used "pit" file.
ReplyDeleteConnect with us on Facebook
Deletehi, how to use that pit file in samsung t7225. i try to flash tablet but it says 'please get the aproval to use binary files'
ReplyDeleteYou need to e-token
Deletehow to get the e-token whether its free ?
ReplyDeleteIts price is high
DeleteI followed your instructions from "https://www.full-repair-firmware.com/2019/10/how-to-root-a405fn-9.0.html" and "EFTSU Manager" signals access to the root, but after the reboot everything comes back, i.e. no root. Help me, I don't know what I'm doing wrong.
ReplyDeleteI use Android 10 UI 2.0 - A405FNXXS3BTI3
phone: Galaxy A40 (SM-A405FN)
EFTSU file: SM-A405FN_A405FNXXS3BTI3_10_20902.9EFT
Power + Volume Up) > System with Root,Turn off the phone then press the volume up and power button for a few seconds, Good luck
Deletehello sir plz can i get your whatsapp number???
ReplyDeletei have a samsung S8 g950fd with android 9 update bunary version is 12
ReplyDeletewhen will be a full repair firmaware that matches the new binary version ? because the latetst one in the web site is version 9
Available versions have been updated Binary 11 and 12 have been added
Deletei`m having trouble about the root of the galaxy s9 g9600, in the site there are diferents versions and it says to download the same as my phone,
ReplyDeletebut my phone is G9600ZCU7FTK2 and there isnt the same to download, can i download a different one?
https://www.full-repair-firmware.com/p/root-g9600.html
You need to change the firmware to
Delete- (G9600ZCU7ETI3)
- (G9600ZCS7ETG3)
- (G9600ZCS7ETJ4)
- (G9600ZCS7FTK3)
- (G9600ZCU7FTJ8)
- (G9600ZCU7FUA1)
Apakah hp yang diroot menghapus semua data??
ReplyDelete